We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Your position: Home / Online Shopping Mall / eBike Conversion Kits / 500W-2000W Gearless Hub Motor Wheel Kits
PDF Format
  • Description

    36V 750W 48V 1000W 52V 1200W 14", 16", 18", 20" Integral Front Wheel Conversion Kits: 14", 16", 18", 20" 


    Parts Including in this kit:

    36V 750W / 48V 1000W / 52V 1200W 14"/16"/18"/20" Integral Front Motorized Wheel
    14x2.5"/ 16x2.5"/ 18x2.5"/ 20x2.5" Tire and tube installed
    36V/48V/52V 35A 15 MOSFET 3-mode Sine Wave Controller
    Controller Bag
    UKC1 Color Display (with 5V USB output)
    Half-bar Twist Speed Throttle with Electric Key Lock 2ea. Handlebar Grips
    Brake Levers (Left and Right)
    Pedelec Sensor (PAS) 


    Motor Specification:
    1) High Motor Efficiency: max 88.7% (Save Power)
    2) Torque: max torque 40 N.m.
    3) RPM: max 450
    4) Speed: 0-50 km/h (different wheel size, road & weather condition and rider's weight will have different speed)
    5) Hub Width (dropout): 100mm Front Wheel hub motor
    6) Support standard 6-hole type disc brake
    7) Front Integral Wheel

    Controller Specification:
    1) 36V/48V/52V 35A 15 MOSFET 3-mode Sine Wave Controller
    2) Rated Voltage: DC36V or 48V or 52V universal
    3) Rated Current: 17A
    4) Max Current: 35 +/- 1A
    5) Speed set: 1-4.2V
    6) Brake Input: Low Level
    7) Low Voltage Protection: DC30/40/43V +/- 0.5V
    8) Compatible with LCD Display or without Display (need to plug LCD jumper connector)
    9) Size:


    LCD Specification:3.5 inch IPS screen
    1) 24V/36V/48V/52V/60V/72V battery supply
    2) Rated operating power : 1W
    3) Max operating power : 5W
    4) USB charging port : 5V 500mA
    5) Off leakage current < 1uA
    6) Support current to controller : 100mA
    7) Size:111.1*66.8*82.8mm
    8) Waterproof grade:IP65
    9) Operating temperature : -20~70℃, 
    10) Storage temperature : -30~80℃


    Installation Guidance:
    1) Unscrew the existing rear wheel screws, remove your rear wheel;
    2) Install the motorized wheel and fasten screws;
    3) Attach LCD, Brake lever and throttle;
    4) Put Controller at suitable position and connect all wires.
    5) Turn on battery, throttle key and LCD, set correct value from LCD
    Correct wheel size setting: according to your wheel size
    Correct motor magnet quantity setting: set it at 46
    Save all value and restart LCD display 


    1.  How shall I match my motor for first time use? (Very Important)
    (Please check Controller Connection Diagram and Manual, Page 1)
    1). Lift your motor wheel off ground (very important)
    2). Connect Self-learning plug 6-8 seconds
    3). You will see motor wheel rotate slowly
    4). Please check whether rotation direction is correct
    (a). If correct direction, then keep 6-8 seconds, then disconnect
    (b). If reverse direction, then disconnect and plug again till get correct rotation direction, then keep 6-8 seconds, then disconnect
    5). Motor and Controller Pairing finished!

    2. Can I use this controller without display?
    Yes, you can use this controller without display, just need to connect jumper connector (Please check Controller Connection Diagram and Manual, Page 4, point No.3) 

    3. How can I limit speed?
    In some countries, below 25km/h speed is required on road, you can switch on/off speed limit function by connecting a simple switch to controller speed limit plug, or you can even connect jumper connector to always limit speed (Please check Controller Connection Diagram and Manual, Page 9-10, point No.12) 
    Manual Download:
    1. Controller Connection Diagram and Manual Download
    2. UKC-1 Display Manual Download

Front Integral Wheel 36V 750W 48V 1000W 52V 1200W eBike 14" 16" 18" 20" Front Wheel Conversion Kits

14" 16" 18" 20" Integral Front Wheel;
14x2.5"/ 16x2.5"/ 18x2.5"/ 20x2.5" Tire and tube installed;
3-mode sine wave controller;
UKC-1 Color Display
38% OFF
  • Wheel Size:
(200 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
Message Us