1.Programmable Sine Wave Controller which support big current and smart match with each motor through self- learning, works with high efficiency, less noise, and lower energy consumption, which makes your electric  vehicles or electric motorcycles more comfortable and easier to control, give you best pedal experience
2.Motor torque ripple is reduced to minimum through FOC, more smooth and comfortable
3.Universal Input Voltage Range: 48V/60V/72V
4.Work with or without display
5.Parameter setting via Mobile Phone App or Computer
6.All protection make it long life and safe: over/under voltage, over current, over load, over heating, anti-runaway, locked-motor protection
7.Multi functions: Smart match with different motor, 5-speed level for throttle and PAS, Speed limit, reverse, anti-thief, Regenerative Braking, Electric Braking, Keyless start and etc.
8.Best heat sinking with thicker Heat sink Aluminium Plate
9.Anodized Aluminium Controller Case against scratch 

Technical Data:

General Specification:
1.Power supply: 48V/60V/72V, MAX DC current: 150A, Max phase current: 250A
2.Rated Power: 48V 5000W/ 60V 6300W/ 72V 7500W
3.Peak Power: 48V 7200W/ 60V 9000W/ 72V 10000W
4.Low Voltage Protection: 40V/50V/60V
5.Brake: Low Voltage Brake
6.Alarm: Low Voltage Alarm
7.Rotor Position Detecting Method: Hall sensor
8.Mobile phone App or computer software can communicate with the controller to modify parameter
9.Size: 275x121x62mm
10.Net Weight: 2.05 kgs
11.Waterproof Grade: IP65

RisunMotor programmable sine-wave motor controller works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control. Our designed friendly interface of the programmable motor controller makes you set the parameters, conduct the tests and obtain the diagnostic info easily and quickly.

1.FOC-180° sinusoidal drive controller applied to BLDCM or PMSM.
2.It takes only 2-3 minutes for the motor to be well matched on its best electronic angle at the first time.
3.The motor torque ripple will be reduced to the minimum, so as to ensure electric vehicle to run without any noise      and vibration, smoothly, and comfortably.
4.The precise current ring can provide accurate torque input to meet the requirement of large torque output during      vehicle starting and climbing.
5.The controller enjoys high efficiency due to space vector converter control algorithm which can effectively reduce    the temperature rise of controller and extend battery life mileage
6.Built-in various protection: locked-rotor protection, over-current protection, overload protection, over-temperature    protection, speed protection, over-voltage protection, under-voltage protection and so on, effectively ensuring the    safety of electronic control system and vehicle.
7.System status and fault intelligent management system can effectively monitor the current system operating mode external input state, the case of system failure, and the LED flashes at the same time to facilitate the       diagnosis and maintenance.
8.Multi peripheral interfaces: reverse, cruise, anti-theft electronic brake, etc.
9.Parameter modifications and settings are available through Mobile phone via Bluetooth or computer via USB data  cable
10.CAN BUS is optional to communicate with body instrument and BMS
 

FAQ:

1. Can I use this controller without display?

Yes, you can use this controller without display, just need to connect jumper connector (Please check Controller Connection Diagram, Page 3, point No.5) 

2. Why when I turn on Display, it always show "Error 30H"?

Please kindly check whether you also connect communicaton plug (Please check Controller Connection Diagram, Page 6, point No.12) 

3. Why when I connect Bluetooth Module or USB Cable, it always show "Connection Failure"?

Please kindly check whether you disconnect communicaton plug (Please check Controller Connection Diagram, Page 6, point No.12), and also reconnect Bluetooth Module or USB Cable to ensure good connection.

4. If I want to use your controller work with my motor, what shall I do?

To get best efficiency, we recommend you to match your motor with our controller firstly (Please check Controller Manual-APP Version, Page 5-9, or check Controller Manual-USB Cable, Page 6-7)