Dual Battery Pack Switcher Parallel Connection Module (Single Discharge)

Dual Battery Pack Switcher Module can manage two battery packs which fixed on your bike, low power, Consumption design, real-time detect the voltage of both two battery packs, Battery on-line check.

Module will stop power output when voltage low than low-cut voltage to protect the battery.

This dual battery switcher module works as this way: firstly will discharge battery pack A till end and then will discharge another battery pack automatically to power your bike again when one battery power become empty while riding. This module will always discharge one battery pack at same time. If you want another type dual 

Module: dual battery balance parallel module, please click here, this module support both battery discharge together at same time.

Parameter:
Maximum output current: 15A/20A/30A/40A
Nominal Voltage: 24V/36V/48V/52V/60V
Plug Connector: XT60
14AWG Silicone Wire
Wire length: 10cm

Size: 45x18.5x49mm, 45x18.5x60mm, 45x18.5x71mm

Woking Temperature: -20-60℃

Waterproof: yes
Application: Connect 2 Batteries in Parallel / Double Capacity, will switch from one battery to another battery automatically
The two battery's voltage need to be almost same, and the battery's capacity can be different

Working Process:

1. MCU monitor voltage of both batteries in real time and send the volatage value by UART (only if UART interface is available).

2. Automatic Battery working detecting. Switch to the battery and discharge it, if only one battery is connected with this module.

3. Will discharge BAT-A firstly, and will switch to BAT-B automatically when the voltage of BAT-A is low than cut-off value.

4. Stop discharge when the voltage of both batteries are low than cut-off value.

Important Tips:

Thank you for purchasing our Dual Battery Switcher Discharge Module, Please read this manual carefully, if you have any questions, please feel free to contact us or your supplier.

Please make sure the battery pack which connected with our module has same technical parameters otherwise maybe cause damage if you use incompatible Dual Battery Pack Switcher with your battery pack.

Attention: DO NOT WRONG CONNECT POSITIVE AND NEGATIVE POLE on Dual Battery Switcher Discharge Module, and ensure both two battery packs is power off before connecting.

Warning: DO NOT TOUCH it by your hand directly during discharge, it will become hot during discharging .

Notice:  Please provide the technical parameters related with your battery as details before ordering.