-
Description
36V 1200W 48V 1500W Powerful eBike Rear Wheel Conversion Kits: 20-29 Size
36V 1200W / 48V 1500W 20-29er RearMotorized Wheel with thread-on Shimano 7-speed freewheel
Tire and tube installed
36V/48V 35A 15 MOSFET Controller
Controller Bag
UKC-1 Colorful display
Half-bar Twist Speed Throttle with Electric Key Lock 2ea. Handlebar Grips
Brake Levers (Left and Right)
Pedelec Sensor (PAS)
Battery Connecting CableMotor Specification:
1) High Motor Efficiency: max 88.7% (Save Power)
2) Torque: max torque 75.1 N.m.
3) RPM: max 497.5
4) Speed: 0-55 km/h (different wheel size, road & weather condition and rider's weight will have different speed)
5) Hub Width (dropout): 135mm rear thread-on hub motor
6) Support standard 6-hole type disc brake
7) Rear Wheel with 7-speed Shimano freewheel
Technical Data:
General Specification:
1. Rated Power: 36V 650W/ 48V 860W/ 52V 930W
2. Peak Power: 36V 1200W/ 48V 1600W/ 52V 1800W
3. Brake: Low Voltage Brake
4. Alarm: Low Voltage Alarm
5. Rotor Position Detecting Method: Hall sensor
6. Size: 212x86.5x48.5mm
7. Net Weight: 610g
8. Waterproof Grade: IP65Advantage:
1. Sine Wave Controller which support 3-mode (hall sensor mode, non-hall mode, self-learning) and smart match with each motor through self-learning, works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control, give you best pedal experience
2. Universal Input Voltage Range: 36V/48V/52V
3. Work with or without display
4. Parameter setting via display
5. All protection make it long life and safe: over/under voltage, over current, over load, over heating, anti-runaway, locked-motor protection
6. Multi functions: Work with hall sensor mode or non-hall mode, smart match with different motor, 5-speed level for throttle and PAS, Speed limit, Reverse, Cruise, Push Assistant, Anti-thief, Regenerative Braking, Electric Braking and etc.
7. Best heat sinking with Aluminium Case 8. Black anodized Aluminium Controller Case against scratch
Why 3-mode Controller?
1. Support Hall Sensor Mode (Sine Wave Mode)
2. Support Non-Hall Mode (If your motor hall sensor burned or not match, controller will still work in square wave mode)
3. Self-learning Function: Even wrong 3-phase combination between motor and controller, doesn’t matter, above self-learning process can correct it!
Installation Guidance:
1) Unscrew the existing rear wheel screws, remove your rear wheel;
2) Install the motorized wheel and fasten screws;
3) Attach LCD, Brake lever and throttle;
4) Put Controller at suitable position and connect all wires.
5) Turn on battery, throttle key and LCD, set correct value from LCD
Correct wheel size setting: according to your wheel size
Correct max speed setting: set it at max value 99
Correct P1-P5 setting: P1=46,P2=0,P3=0,P4=0,P5=12
Save all value and restart LCD display
-
Product reviews can be carried out after the member login, please click here to login